Retaining Wall

From Captain of Industry Wiki
Revision as of 16:29, 1 July 2022 by AK615 (talk | contribs)
Jump to: navigation, search
Buildings (For Vehicles).png
Retaining Wall (Long)
Retaining Wall (Long).png
Wall that retains ground level.
Construction
Iron.png
9
+
Concrete Slab.png
30
WorkersNone
ElectricityNone
MaintenanceNone
Footprint2x4
Required ResearchRetaining Walls
DesignationBuildings (For Vehicles) Buildings (For Vehicles).png
VariantsRetaining Wall (Short)
Retaining Wall (Long)
Retaining Wall (Cross)
Retaining Wall (Tee)

Retaining Walls is a structure that prevents the falling of dumped Loose products while the tile behind it is excavated or dumped on. It exists in 5 variants with with different footprints (1x2, 2x2 and 2x4). Retaining wall can be built with different levels of submersion to the ground. Retaining walls, as other buildings, will start to take damage as it's foundation tile is reaches below the red-marked bottom area of the wall or when the materials, dumped upon its top, rise the ground level above its top level.

It is advised to place Retaining Walls exactly on the center of a excavating/dumping tile border, as otherwise excavators will be able to dig "through" the wall and trucks dump "over" it, when assigned to a mining tile which is colliding with the wall.

Retaining Wall (Long) is exactly the length of a mining/dumping tile, which is 4x4.

Gallery