Difference between revisions of "Pipe Balancer"

From Captain of Industry Wiki
Jump to: navigation, search
m (Footer Infobox)
Line 15: Line 15:
| Variants      = [[Flat Balancer]]<br/>[[Molten Balancer]]<br/>[[U-shape Balancer]]
| Variants      = [[Flat Balancer]]<br/>[[Molten Balancer]]<br/>[[U-shape Balancer]]
}}
}}
The '''Pipe Balancer''' is a [[:Category:Transports|transport]] with 8 [[Pipe]] [<nowiki/>[[Pipe II|II]] • [[Pipe III|III]]] ports. Its serves two different but important roles: To allow you to pick priority Input(s) and Output(s) of the '''balancer''' and to allow for the (strict) evening out of the resources between multiple inputs, multiple outputs, or both.
The '''Pipe Balancer''' is a [[:Category:Transports|transport]] with 8 [[Pipe]] [<nowiki/>[[Pipe II|II]] • [[Pipe III|III]]] ports. Its serves two different but important roles: To allow you to pick priority Input(s) and Output(s) of the '''balancer''' and to allow for the (strict) evening out of the resources between multiple inputs, multiple outputs, or both.


Line 25: Line 24:


Note that '''Pipes''' category does not have a Sorter, nor can all of the products, transferred by the pipes, be stored in a [[Fluid Storage]] [<nowiki/>[[Fluid Storage II|II]] • [[Fluid Storage III|III]] • [[Fluid Storage IV|IV]]] (namely variants of <nowiki/>[[Steam Hi|Steam]] [<nowiki/>[[Steam Lo|Lo]] • [[Steam Depleted|Depleted]]]).
Note that '''Pipes''' category does not have a Sorter, nor can all of the products, transferred by the pipes, be stored in a [[Fluid Storage]] [<nowiki/>[[Fluid Storage II|II]] • [[Fluid Storage III|III]] • [[Fluid Storage IV|IV]]] (namely variants of <nowiki/>[[Steam Hi|Steam]] [<nowiki/>[[Steam Lo|Lo]] • [[Steam Depleted|Depleted]]]).


==Balancer UI==
==Balancer UI==
Line 31: Line 29:


Two toggles are available under "Even I/O ratios":
Two toggles are available under "Even I/O ratios":
* Enforce strictly even inputs  
* Enforce strictly even inputs  
* Enforce strictly even outputs
* Enforce strictly even outputs
Line 39: Line 36:


On the right side of the UI is "Priority", which sets the power/manpower/maintenance priority for this building. It is advised to keep this fairly high for any of the balancers, as they will severely damage any resource chains when out of order and they do not actually consume any of manpower nor maintenance, only 5kW of power.
On the right side of the UI is "Priority", which sets the power/manpower/maintenance priority for this building. It is advised to keep this fairly high for any of the balancers, as they will severely damage any resource chains when out of order and they do not actually consume any of manpower nor maintenance, only 5kW of power.


==Strictly Even inputs or outputs==
==Strictly Even inputs or outputs==
Line 49: Line 45:


Enforcing strictly even inputs/outputs resets any priorities set for the ports.
Enforcing strictly even inputs/outputs resets any priorities set for the ports.


==Priority input or output==
==Priority input or output==
Any prioritized port is prioritized over a nonprioritized port. All nonprioritized ports are equal, all prioritized ports are equal.  
Any prioritized port is prioritized over a nonprioritized port. All nonprioritized ports are equal, all prioritized ports are equal.  


==Example use cases==
==Example use cases==
Line 60: Line 54:
* Balancing inputs: to ensure that two or three dock [[Fluid Module]]s are pulled from equally
* Balancing inputs: to ensure that two or three dock [[Fluid Module]]s are pulled from equally
* Balancing outputs: to ensure that [[High-pressure Turbine]]s receive equal amounts of steam from a [[Nuclear Reactor]]
* Balancing outputs: to ensure that [[High-pressure Turbine]]s receive equal amounts of steam from a [[Nuclear Reactor]]


==See also==
==See also==
* [[Pipe]] [<nowiki/>[[Pipe II|II]] • [[Pipe III|III]]]
* [[Pipe]] [<nowiki/>[[Pipe II|II]] • [[Pipe III|III]]]
* [[Pipe Connector]]
* [[Pipe Connector]]
Line 69: Line 61:
* [[Molten Balancer]]
* [[Molten Balancer]]
* [[U-shape Balancer]]
* [[U-shape Balancer]]
 
{{Footer Infobox}}
{{Navbox/Machines}}

Revision as of 06:30, 3 May 2023

Transports.png
Pipe Balancer
Pipe Balancer.png
Allows distributing and prioritizing products using any of its two input and output ports.
Construction
Construction Parts II.png
8
ElectricityElectricity.png 5 KW
Footprint2x2
CargoCategory:Fluid products
Required ResearchTransports Balancing
DesignationTransports Transports.png
VariantsFlat Balancer
Molten Balancer
U-shape Balancer

The Pipe Balancer is a transport with 8 Pipe [IIIII] ports. Its serves two different but important roles: To allow you to pick priority Input(s) and Output(s) of the balancer and to allow for the (strict) evening out of the resources between multiple inputs, multiple outputs, or both.

Each of the 8 ports can be either input or output (or neither). The direction of the port is determined by the direction of the Pipe [IIIII] connected to it.

The Pipe Balancer works as a balancer, without any options toggeled - it will balance any inputs and outputs (with the same level of priority), effectivly acting as an (double) OR Gate. The Pipe Connector has the same effect, thus being the preferred option for this use case (since the patch v0.4.13).

The Pipe Balancer can only be connected to Pipes [IIIII], it can not be connected directly to buildings.

Note that Pipes category does not have a Sorter, nor can all of the products, transferred by the pipes, be stored in a Fluid Storage [IIIIIIV] (namely variants of Steam [LoDepleted]).

Balancer UI

The player can open the balancer's UI by clicking on the transport.

Two toggles are available under "Even I/O ratios":

  • Enforce strictly even inputs
  • Enforce strictly even outputs

Under "Prioritization" each port can be prioritized and it also dislpays whether it's an input or output port. It is possible to prioritize none, one, two, ... , or even all of the ports simultaneously, depending on the desired use case.

On the right side of the UI is "Priority", which sets the power/manpower/maintenance priority for this building. It is advised to keep this fairly high for any of the balancers, as they will severely damage any resource chains when out of order and they do not actually consume any of manpower nor maintenance, only 5kW of power.

Strictly Even inputs or outputs

If both the first and the second toggles are activated, the transport will only pull equally from connected input ports and push equally to connected output ports, effectivly acting as an (double) AND Gate.

Which means that if one of the output ports is full (blocked) then any resources won't be sent through any other output ports either.

Similiarily when an input port is lacking resources, no resources are brought in from any other input ports.

Enforcing strictly even inputs/outputs resets any priorities set for the ports.

Priority input or output

Any prioritized port is prioritized over a nonprioritized port. All nonprioritized ports are equal, all prioritized ports are equal.

Example use cases

  • Priority input: to ensure that a Fluid Storage is emptied before accepting stock from a main pipeline
  • Priority output: to ensure that a storage or machine receives as much input as it can handle and any excess is flared or dumped
  • Balancing inputs: to ensure that two or three dock Fluid Modules are pulled from equally
  • Balancing outputs: to ensure that High-pressure Turbines receive equal amounts of steam from a Nuclear Reactor

See also