Difference between revisions of "Molten Balancer"

From Captain of Industry Wiki
Jump to: navigation, search
m (update cost)
m (Update a infobox machine for version 0.5.2)
 
(6 intermediate revisions by 2 users not shown)
Line 8: Line 8:
     | Input1Qty  = 8
     | Input1Qty  = 8
   }}
   }}
| Electricity = 5 KW
| Electricity   = 20 KW
| Cargo        = [[:Category:Molten products|Molten products]]
| Cargo        = [[:Category:Molten products|Molten products]]
| Footprint    = 2x2
| Footprint    = 2x2
Line 15: Line 15:
| Variants      = [[Flat Balancer]]<br/>[[Pipe Balancer]]<br/>[[U-shape Balancer]]
| Variants      = [[Flat Balancer]]<br/>[[Pipe Balancer]]<br/>[[U-shape Balancer]]
}}
}}
The '''Molten Balancer''' is a [[:Category:Transports|transport]] with 8 [[Molten Channel]] ports. Its serves two different but important roles: To allow you to pick priority Input(s) and Output(s) of the '''balancer''' and to allow for the (strict) evening out of the resources between multiple inputs, multiple outputs, or both.


{{outdated}}
Each of the 8 ports can be either input or output (or neither). The direction of the port is determined by the direction of the Molten channel connected to it.


The '''Molten Balancer''' is a [[:Category:Transports|transport]] with four [[Molten Channel]] ports. Its serves two different but important roles: to allow for the balancing of molten flow between multiple inputs, multiple outputs, or both; and to give the capability to be able to input or output from a specific channel connection.
The '''Molten Balancer''' works as a balancer, without any options toggeled - it will balance any inputs and outputs (with the same level of priority), effectivly acting as an (double) [[wikipedia:OR_gate|OR Gate]]. The [[Molten Connector]] has the same effect, thus being the preferred option for this use case (since the patch v0.4.13).


On one side, one port is marked <code>X</code> while the other port is marked <code>O</code>. The same is true likewise on the other side but with reversed coloring. While the balancer is round on one end while flat on the other and the in-game description would seem to indicate that two must be inputs and two must be outputs, any of the 4 connections can operate as either inputs or outputs, there cannot be four input or four outputs at the same time. Input or output determination is done automatically using the flow direction of the channel attached to that port. Thus, rotating the balancer 180 degrees only has the effect of switching which side the <code>X</code> and <code>O</code> letters appear on the transport graphically and rotating the balancer 90 or 270 degrees only serves to change which colors the port labels are on any given end.
The '''Molten Balancer''' can only be connected to [[Molten Channel]]s, it can not be connected directly to buildings.
 
Note that '''Molten''' category does NOT have a Sorter nor any kind of external Storage.
 
[[Molten Channel]] cannot operate at an incline nor a decline so this further limits potential uses for the balancer.


==Balancer UI==
==Balancer UI==
The player can open the balancer's UI by clicking on the transport. Three toggles are available:
The player can open the balancer's UI by clicking on the transport.  


* Prioritize incoming products to port marked X
Two toggles are available under "Even I/O ratios":
* Prioritize outgoing products from ports marked X
* Enforce strictly even inputs
* Use alternative priority ports (O) instead of default (X)
* Enforce strictly even outputs


In other words, the first toggle is provided to mark the incoming <code>X</code> port as the one receiving input priority. The second toggle does the same for the outgoing <code>X</code> port. The third toggle changes all instances of the letter <code>X</code> to <code>O</code> on the UI and applies the equivalent logic to balancer. It is possible to enable one, two, or even all three toggles simultaneously depending on the desired use case.
Under "Prioritization" each port can be prioritized and it also displays whether it's an input or output port.
It is possible to prioritize none, one, two, ... ,  or even all of the ports simultaneously, depending on the desired use case.


==Balancing inputs or outputs==
On the right side of the UI is "Priority", which sets the power/manpower/maintenance priority for this building. It is advised to keep this fairly high for any of the balancers, as they will severely damage any resource chains when out of order and they do not actually consume any of manpower nor maintenance, only 20 KW of power.
If neither the first nor second toggle are activated, the transport will attempt to pull equally to from the number of connected inputs and push equally to the number of connected outputs. In this case, the third toggle has no impact whether set to on or off. This means that that a single balancer can act as a perfect "1-to-2", "2-to-1", "2-to-2", "1-to-3", or "3-to-1" balancer simply by connecting channels with the desired direction of flow.
 
==Strictly Even inputs or outputs==
If both the first and the second toggles are activated, the transport will only pull equally from connected ''input ports'' and push equally to connected ''output ports'', effectivly acting as an (double) [[wikipedia:AND_gate|AND Gate]].  
 
Which means that if one of the ''output ports'' is full (blocked) then any resources won't be sent through any other ''output ports'' either.
 
Similiarily when an ''input port'' is lacking resources, no resources are brought in from any other ''input ports''.
 
Enforcing strictly even inputs/outputs resets any priorities set for the ports.


==Priority input or output==
==Priority input or output==
The only limitation is when both priority input and priority output are desired at the same time ''and'' there are two inputs and two outputs connected. In this case, the priority choices can be only be "from X to X" or "from O to O" as the the third toggle swaps the letters of both ports at the same time. This limitation can be bypassed by swapping the two input pipes or two output pipes physically and is typically not an issue except in very compact builds.
Any prioritized port is prioritized over a nonprioritized port. All nonprioritized ports are equal, all prioritized ports are equal.  


==Example use cases==
==Example use cases==
The number of practical uses cases for this balancer are low. For {{infoicon|Molten Iron}} and {{infoicon|Molten Copper}}, the output rates from [[Blast Furnace]], [[Blast Furnace II]], and [[Arc Furnace II]] are perfect multiple of the throughputs of the [[Metal Caster]] and [[Metal Caster II]]. The same holds true in the case of {{infoicon|Molten Steel}} for the output the previously mentioned furnaces and the input of [[Oxygen Furnace]] or [[Oxygen Furnace II]] with an identical case of their outputs to [[Cooled Caster]] and [[Cooled Caster II]]. {{infoicon|Molten Glass}} and {{infoicon|Molten Silicon}} ratios are all equal ratios as well to the [[Glass Maker]] or [[Glass Maker II]] and [[Silicon Reactor]], respectively.
The number of practical uses cases for this balancer are low. For {{infoicon|Molten Iron}} and {{infoicon|Molten Copper}}, the output rates from [[Blast Furnace]], [[Blast Furnace II]], and [[Arc Furnace II]] are perfect multiple of the throughputs of the [[Metal Caster]] and [[Metal Caster II]]. The same holds true in the case of {{infoicon|Molten Steel}} for the output the previously mentioned furnaces and the input of [[Oxygen Furnace]] or [[Oxygen Furnace II]] with an identical case of their outputs to [[Cooled Caster]] and [[Cooled Caster II]]. {{infoicon|Molten Glass}} and {{infoicon|Molten Silicon}} ratios are all equal ratios as well to the [[Glass Maker]] or [[Glass Maker II]] and [[Silicon Reactor]], respectively.


[[Molten Channel]] cannot operate at an incline nor a decline so this further limits potential uses for the balancer.
==See also==
 
* [[Molten Channel]]
{{Navbox/Machines}}
* [[Molten Connector]]
* [[Flat Balancer]]
* [[Pipe Balancer]]
* [[U-shape Balancer]]
{{Footer Infobox}}

Latest revision as of 15:14, 17 May 2023

Transports.png
Molten Balancer
Molten Balancer.png
Allows distributing and prioritizing products using any of its two input and output ports.
Construction
Construction Parts II.png
8
ElectricityElectricity.png 20 KW
Footprint2x2
CargoMolten products
Required ResearchTransports Balancing
DesignationTransports Transports.png
VariantsFlat Balancer
Pipe Balancer
U-shape Balancer

The Molten Balancer is a transport with 8 Molten Channel ports. Its serves two different but important roles: To allow you to pick priority Input(s) and Output(s) of the balancer and to allow for the (strict) evening out of the resources between multiple inputs, multiple outputs, or both.

Each of the 8 ports can be either input or output (or neither). The direction of the port is determined by the direction of the Molten channel connected to it.

The Molten Balancer works as a balancer, without any options toggeled - it will balance any inputs and outputs (with the same level of priority), effectivly acting as an (double) OR Gate. The Molten Connector has the same effect, thus being the preferred option for this use case (since the patch v0.4.13).

The Molten Balancer can only be connected to Molten Channels, it can not be connected directly to buildings.

Note that Molten category does NOT have a Sorter nor any kind of external Storage.

Molten Channel cannot operate at an incline nor a decline so this further limits potential uses for the balancer.

Balancer UI

The player can open the balancer's UI by clicking on the transport.

Two toggles are available under "Even I/O ratios":

  • Enforce strictly even inputs
  • Enforce strictly even outputs

Under "Prioritization" each port can be prioritized and it also displays whether it's an input or output port. It is possible to prioritize none, one, two, ... , or even all of the ports simultaneously, depending on the desired use case.

On the right side of the UI is "Priority", which sets the power/manpower/maintenance priority for this building. It is advised to keep this fairly high for any of the balancers, as they will severely damage any resource chains when out of order and they do not actually consume any of manpower nor maintenance, only 20 KW of power.

Strictly Even inputs or outputs

If both the first and the second toggles are activated, the transport will only pull equally from connected input ports and push equally to connected output ports, effectivly acting as an (double) AND Gate.

Which means that if one of the output ports is full (blocked) then any resources won't be sent through any other output ports either.

Similiarily when an input port is lacking resources, no resources are brought in from any other input ports.

Enforcing strictly even inputs/outputs resets any priorities set for the ports.

Priority input or output

Any prioritized port is prioritized over a nonprioritized port. All nonprioritized ports are equal, all prioritized ports are equal.

Example use cases

The number of practical uses cases for this balancer are low. For Molten Iron and Molten Copper, the output rates from Blast Furnace, Blast Furnace II, and Arc Furnace II are perfect multiple of the throughputs of the Metal Caster and Metal Caster II. The same holds true in the case of Molten Steel for the output the previously mentioned furnaces and the input of Oxygen Furnace or Oxygen Furnace II with an identical case of their outputs to Cooled Caster and Cooled Caster II. Molten Glass and Molten Silicon ratios are all equal ratios as well to the Glass Maker or Glass Maker II and Silicon Reactor, respectively.

See also